1.Excavator weighing systerm . Fully preheat the vehicle and extend the shaker to make the entire vehicle’s oil and water temperature reach the best. In order to achieve the test accuracy of the weighing system, there are four prerequisites:

1. The parking position of the excavator should be level enough, and the slope should be  controlled within five degrees.

2. When loading the car, it is necessary to control the body to not have a large vibration.

3. The bucket must not be severely shaken or shaken.

4. When the bucket is raised, it must be uniform and stable.

2.In the process of loading, if the system has missed records, please follow the steps below.

1. The bucket returns to the starting position with the material.

2. Click "Cancel" on the screen.

3. Restart the lifting and loading actions; the display can be continued.

3.During the loading process, the driver should estimate the weight of the part that overflows outside the container.

4.Fourth, the best weighing posture designed according to the system is the position where the shaker is perpendicular to the ground, and the lifting measurement must be carried out from this position as much as possible.