excavator load moment indicator
excavator load moment indicator
excavator-weighting-sensor

Excavator load indicator (excavator safe load indicator) is an anti-overload metering device during excavator operation. Through real-time weight monitoring, it can effectively prevent overload during loading. Let’s take a brief look at the installation method of this equipment.

Excavator weighing system is divided into data collection part, data processing part, data display and alarm control part.

Data collection is mainly composed of pressure and inclination sensors. When installing the pressure sensor, pay attention to distinguish the positions of the main and auxiliary oil pressure sensors. Do not reverse it. The interface between the sensor and the oil pipe must be sealed to avoid oil leakage. Pay attention to the correct direction when installing the tilt sensor.

The host is the data processing part of the excavator torque limiter and the core part of the whole set of equipment. The installation location should not be close to the excavator’s engine, where the temperature is too high, it will affect the data calculation speed and accuracy. Also pay attention to waterproof and anti-corrosion.

The display needs to be installed in the cab without affecting the operation of the driver, and also pay attention to waterproofing and corrosion.